3/4"-2" Boring Bar Hottap Machine

WT-3/4-2" Complete Turn Key Package

This 3/4"-2" hot tap machine package rated at 150 psi @ 250 deg F. Includes the following accessories in the kit:

Tapping Machine Kit Includes:
1- 2" adaptor ip threads for performing 2" hot tpas with removable oring housing for easy replacement of packing orings.
1- 18" boring bar for 3/4"- 1 1/4" hot taps
1- 18" boring bar for 1 1/2"-2" hot taps
1- 1/4" test valve/ blow off assembly
1- holesaw mandrel for 24" boring bar
1- 2" x 1 1/2" bell reducer & nipple for performing 1 1/2" hot taps
1- 2" x 1 1/4" bell reducer & nipple for performing 1 1/4" hot taps
1- 2" x 1" bell reducer & nipple for performing 1" hot taps
1- 2" x 3/4" bell reducer & nipple for performing 3/4" hot taps
1- 1/4" pilot drill
1- box of retention wire for 1/4" pilot drill
1- 3/8" pilot drill
1- box of retention wire for 3/8" pilot drill
1- 11/16" hhs holesaw
1- 7/8" hhs holesaw
1- 1 1/8" hhs holesaw
1- 1 3/8" hhs holesaw
1- 1 7/8" hhs holesaw

*carbide holesaws available for added cost*

3/4" - 2" Hot Tap Machine Package

 

Total: $1,295.00 + Shipping

order now.

 

Accessories

Pilot Drill Bits

     1/2"-6" Pilot Drill Shafts and Tips with Retention Wire
1/4"x 4"Pilot drill bits w/ retention wire
Retainer Wire Install Demo Video 		$ 18.50ea.
3/8"x 5" Pilot drill bits w/ retention wire
Retainer Wire Install Demo Video		 $ 46.95ea.
       

Boring Bars

     Hot Tapping Machine Boring Bars

18" Boring bar for 3/4"-1 1/8" taps (small threads) accepts 1/4" pilot drill

$195.00ea.
18" Boring bar 5/8"-18 threads accepts 3/8" pilot drill $165.00ea.
24" Boring bar 5/8"-18 threads accepts 3/8" pilot drill $195.00ea.
30" Boring bar 5/8"-18 threads accepts 3/8" pilot drill $195.00ea.
       

Mandrels

     Boring bar mandrels for holesaw
Boring bar mandrels for holesaw 5/8"-18 thread $89.65ea.
     

Wrench

 Extension wrench is designed for installing or chucking the boring into the drive motor with ease outside of the rails! makes for alot quicker hot tap! $40.00ea. Boring bar mandrels for holesaw